TRONXY VEHO 800 Pro Buyer's Guide: Specs, Running Costs and Setup Space
The TRONXY VEHO 800 Pro prints parts up to 800 x 800 x 800 mm on Klipper firmware. This guide explains its specs, estimated running costs, the space it needs and when a smaller VEHO is the better choice.
Last updated: 2026-11-16 Author: Layerline Editorial Team
Everything to check before buying an 800 mm Klipper printer: manufacturer specs, power, filament and time per large print, and how much room you need.
The TRONXY VEHO 800 Pro is a Klipper-based FDM 3D printer with an 800 x 800 x 800 mm build volume, a 320°C hotend and a 110°C heated bed. It is built for people who need to print very large parts in one piece: signage, props, displays, full-scale prototypes and production fixtures. This guide covers the manufacturer specs, what the machine costs to run in power, filament and time, how much room you need, and when a smaller VEHO model is the better buy.
All figures in this guide come from the manufacturer's specifications. Where we give running-cost or print-time numbers, they are calculated estimates and are clearly labelled as such.
What is the TRONXY VEHO 800 Pro?
The VEHO 800 Pro is TRONXY's largest model in the VEHO line: a cube-shaped printer with an 800 mm build volume on every axis, controlled by Klipper firmware. It combines a large print area with motion specs that are normally found on much smaller machines (300 mm/s print speed, 600 mm/s travel and up to 20,000 mm/s² acceleration).
For comparison, a typical desktop printer has a build volume of around 220 to 256 mm per side. The 800 Pro offers roughly 30 to 50 times that volume, which changes what you can make: a full-size helmet, a 70 cm sign letter or a chair-back prototype fits without splitting the model.
VEHO 800 Pro specifications
| Spec | VEHO 800 Pro (manufacturer data) |
|---|---|
| Build volume | 800 x 800 x 800 mm |
| Firmware | Klipper |
| Max print speed | 300 mm/s |
| Max travel speed | 600 mm/s |
| Max acceleration | 20,000 mm/s² |
| Layer height | 0.1-0.8 mm |
| Max nozzle temperature | 320°C |
| Max bed temperature | 110°C |
| Hotend max flow | 32 mm³/s |
| Nozzle | Nickel-plated brass |
| Extruder | Dual-gear direct drive |
| Build surface | Tempered glass + silicone heater; optional PEI steel plate |
| Levelling | Independent Z tilt correction (4 Z motors) + 36-point mesh, magnetic levelling |
| Sensors | Filament run-out sensor |
| Screen | 7-inch touchscreen |
| Connectivity | LAN, USB, TF card |
| File formats | STL, OBJ, AMF, 3MF, STEP, SVG |
| Slicers | OrcaSlicer, Cura, PrusaSlicer |
| Materials | PLA, ABS, PETG, wood-fill, TPU, PA, PC, CF-PLA, PA-CF |
| Power | AC110V 1600 W / AC220V 1800 W |
| Machine size | 1040 x 1103 x 1211 mm |
| Machine weight | 68 kg (±2.5 kg) |
What the key specs mean in practice
- 32 mm³/s hotend flow is the real speed limit on large prints. Big parts use thick walls and wide lines, so the volume of plastic the hotend can melt per second matters more than the headline 300 mm/s.
- Layer height up to 0.8 mm lets you trade surface detail for speed on parts where finish is less important, such as internal structures or parts that will be sanded and painted.
- 320°C nozzle and 110°C bed open the door to engineering materials such as PC and PA-CF, not just PLA and PETG.
- Four independent Z motors with tilt correction keep an 800 mm gantry square to the bed, which is one of the hardest problems on any large-format machine.
What does it cost to run a VEHO 800 Pro?
Running costs come down to three things: electricity, filament and time. The numbers below are estimates calculated from the manufacturer specs and standard material properties. Your real numbers depend on the model, slicer settings, room temperature and local energy prices.
Power consumption (estimate)
The manufacturer lists the power supply at 1600 W (110 V) or 1800 W (220 V). That is the maximum rating, not the constant draw. Most of the peak load comes from heating an 800 x 800 mm bed; once the bed and nozzle are at temperature, the heaters cycle on and off.
| Scenario | Assumed average draw | 24-hour print | 48-hour print |
|---|---|---|---|
| PLA, bed at 60°C, warm room | about 500-700 W | 12-17 kWh | 24-34 kWh |
| PETG/ABS, bed at 80-110°C | about 800-1100 W | 19-26 kWh | 38-53 kWh |
Estimate only. Average draw is an assumption, not a manufacturer figure. Multiply kWh by your local price per kWh for the cost. A draft-free room or an enclosure reduces heater cycling.
Filament per large print (estimate)
PLA has a density of about 1.24 g/cm³, so 1 kg of PLA is roughly 800 cm³ of plastic. Large parts are rarely solid; most are printed with 2 to 4 walls and 5 to 15% infill.
| Example part | Rough filament (PLA) |
|---|---|
| Cosplay helmet, 2 walls, light infill | 0.6-1.2 kg |
| 600 mm tall sign letter, 15 cm deep | 1.5-3 kg |
| Torso armour piece in one part | 2-4 kg |
| Full-scale chair-back or panel prototype | 3-6 kg |
| Near-full-volume display piece | 6-12 kg |
Estimates based on typical wall and infill settings. Check the slicer's material estimate for your exact model.
Print time (estimate)
The hotend's 32 mm³/s is the maximum flow. On long prints most users run below the limit for reliability, often in the 15-25 mm³/s range. At 20 mm³/s, one kilogram of PLA (about 806,000 mm³) takes roughly 11 hours of pure extrusion. Add travel moves, slower outer walls, first layers and cooling, and a realistic planning figure is about 12 to 18 hours per kilogram at fast settings, and longer at fine layer heights.
That means a 3 kg sign letter is roughly a two-day job, and a 10 kg display piece can run for a week. Plan for that: use a filament run-out sensor (the 800 Pro has one), keep spare spools dry and close to the printer, and avoid placing the machine where a power cut or a curious visitor can interrupt it.
How much space do you need for a VEHO 800 Pro?
The machine measures 1040 x 1103 x 1211 mm (W x D x H) and weighs about 68 kg. It does not fit on a normal desk.
Plan for:
- Floor or a heavy-duty bench. A workbench rated well above 68 kg plus the weight of spools and tools. Many users place it directly on the floor or on a low, rigid stand to reduce wobble at high acceleration.
- Clearance around the frame. Leave room at the front to remove large prints and at the sides and back for cables, spool holders and airflow. A floor area of roughly 1.5 x 1.5 m is a practical minimum.
- Ceiling height and access. At 1211 mm tall, check that you can reach the top of the machine for maintenance and filament loading.
- Doors and stairs. Measure door widths and the route to the room before delivery. Two people are needed to move the machine safely.
- Power. A dedicated wall socket, not an extension reel shared with other high-power devices. The rating is up to 1800 W at 220 V.
- Ventilation. Printing ABS, PC or nylon blends produces fumes; use a ventilated room. A draft shield or enclosure helps with warping on these materials.
Who is the VEHO 800 Pro for?
The VEHO 800 Pro is aimed at buyers whose parts are physically larger than 500 or 600 mm, or who want to print several medium-size parts in one batch.
It is a good fit for:
- Sign makers and retail display builders who print 3D letters, logos and point-of-sale displays.
- Prop makers for film, theatre and events who need large, light parts that can be sanded and painted.
- Cosplayers and costume studios who want armour and helmets in one piece, with fewer seams.
- Product designers and furniture makers who prototype at full scale before tooling or CNC work.
- Architecture and urban-planning studios printing large site models.
- Workshops and makerspaces that run batch production of jigs, fixtures and parts.
For a detailed list of project ideas with filament and time estimates, see What can you print with an 800 mm 3D printer?.
Who should pick a smaller VEHO model instead?
A bigger printer is not automatically a better printer. Choose a smaller model if:
- Your parts are under 600 mm. The VEHO 600 Pro V3 offers 600 x 600 x 600 mm in a machine of 847 x 847 x 970 mm, with the same 300 mm/s print speed and 4 independent Z ball screws.
- Your parts are under 500 mm and space is limited. The VEHO 500 Pro gives 500 x 500 x 500 mm in a 740 x 740 x 895 mm frame.
- You want speed on medium parts. The VEHO 4 has a 400 x 400 x 400 mm build volume, up to 700 mm/s print speed and a 650 x 620 x 602 mm footprint at 22.5 kg. It still fits on a sturdy desk.
- You mainly print small parts in volume. Heating an 800 mm bed for a 100 mm part is slow and wastes energy. A smaller machine finishes more small jobs per day.
Compare all four side by side in our VEHO 800 Pro vs 600 Pro V3 vs 500 Pro vs VEHO 4 guide.
Before you buy: a quick checklist
- Measure your largest real part, then add 10 to 20% margin for brims and supports.
- Measure the room, the door and the route for a 1040 x 1103 x 1211 mm, 68 kg machine.
- Check your power socket and electricity price.
- Decide on materials. For ABS, PC or nylon blends, plan ventilation and a draft shield.
- Choose your slicer. OrcaSlicer, Cura and PrusaSlicer are supported.
- Budget time for setup and calibration. Our VEHO Klipper setup and calibration guide walks through levelling, input shaping and pressure advance.
If you are still comparing machine types, our CoreXY 3D printer buyer's guide explains the motion systems used in fast printers, and large-format FDM 3D printers compared puts the VEHO line next to other 500 mm+ machines.
Frequently asked questions
What is the build volume of the TRONXY VEHO 800 Pro?
The VEHO 800 Pro has a build volume of 800 x 800 x 800 mm, according to the manufacturer. The machine itself measures 1040 x 1103 x 1211 mm and weighs about 68 kg.
How much power does the VEHO 800 Pro use?
The manufacturer rates the power supply at 1600 W on 110 V and 1800 W on 220 V. That is the maximum; average draw during a print is lower once the bed and nozzle are at temperature, and depends on bed temperature and room conditions.
How long does a large print take on the VEHO 800 Pro?
As an estimate, plan for about 12 to 18 hours per kilogram of PLA at fast settings, based on the 32 mm³/s hotend flow rating and a sustained flow of 15 to 25 mm³/s. A 3 kg part is roughly a two-day print.
Which materials can the VEHO 800 Pro print?
The manufacturer lists PLA, ABS, PETG, wood-fill, TPU, PA, PC, CF-PLA and PA-CF. The nozzle reaches 320°C and the bed 110°C.
Which slicers work with the VEHO 800 Pro?
OrcaSlicer, Cura and PrusaSlicer are listed as compatible. The printer accepts STL, OBJ, AMF, 3MF, STEP and SVG files and connects over LAN, USB or TF card.
Should I buy the VEHO 800 Pro or a smaller VEHO?
Buy the 800 Pro if your parts are regularly larger than 600 mm or you batch many medium parts. If your parts fit in 600, 500 or 400 mm, the VEHO 600 Pro V3, 500 Pro or VEHO 4 take less space and heat up faster.
Next step
Ready to print at full scale? See the TRONXY VEHO 800 Pro product page for full specifications, current price and shipping from our EU and US warehouses.