VEHO 800 Pro vs 600 Pro V3 vs 500 Pro vs VEHO 4: Which Build Volume Do You Need?
The four TRONXY VEHO printers cover build volumes from 400 to 800 mm. Compare their manufacturer specs side by side and use our decision guide to pick the smallest model that fits your parts.
Last updated: 2026-11-16 Author: Layerline Editorial Team
A side-by-side comparison of the four TRONXY VEHO printers on manufacturer specs, with a simple decision guide based on part size, space and speed.
The right TRONXY VEHO model depends on one number: the size of the largest part you need to print in one piece. The VEHO 4 covers parts up to 400 mm, the VEHO 500 Pro up to 500 mm, the VEHO 600 Pro V3 up to 600 mm and the VEHO 800 Pro up to 800 mm on every axis. This guide compares the four models on manufacturer specs and gives a simple decision path so you can pick the smallest machine that still fits your work.
Quick answer: which VEHO should you buy?
- Largest part under 400 mm, limited space, speed matters: VEHO 4.
- Largest part 400-500 mm: VEHO 500 Pro.
- Largest part 500-600 mm: VEHO 600 Pro V3.
- Largest part 600-800 mm, or you batch many medium parts at once: VEHO 800 Pro.
Always add a margin of 10 to 20% to your part size for brims, skirts and supports, and remember that a part placed diagonally can be longer than the bed edge.
VEHO comparison table
| Spec | VEHO 800 Pro | VEHO 600 Pro V3 | VEHO 500 Pro | VEHO 4 |
|---|---|---|---|---|
| Build volume | 800 x 800 x 800 mm | 600 x 600 x 600 mm | 500 x 500 x 500 mm | 400 x 400 x 400 mm |
| Machine size | 1040 x 1103 x 1211 mm | 847 x 847 x 970 mm | 740 x 740 x 895 mm | 650 x 620 x 602 mm |
| Machine weight | 68 kg (±2.5) | Not listed | Not listed | 22.5 kg |
| Firmware | Klipper | Klipper | Klipper | Klipper |
| Max print speed | 300 mm/s | 300 mm/s | 300 mm/s | Up to 700 mm/s |
| Travel speed | 600 mm/s | 600 mm/s | 600 mm/s | Not listed |
| Max acceleration | 20,000 mm/s² | Up to 10,000 mm/s² | Not listed | Up to 20,000 mm/s² |
| Max nozzle temp | 320°C | Up to 300-320°C (per manufacturer) | 320°C | 320°C |
| Max bed temp | 110°C | 100°C | 100°C | 100°C |
| Layer height | 0.1-0.8 mm | 0.2-0.4 mm | Not listed | 0.1-0.8 mm |
| Hotend flow | 32 mm³/s | 32 mm³/s | Not listed | Not listed |
| Z system | 4 Z motors, independent tilt correction | 4 independent Z ball screws | 4 independent Z ball screws | Not listed |
| Levelling | Tilt correction + 36-point mesh, magnetic | Magnetic auto-levelling + 36-point mesh | Magnetic auto-levelling | 36-point auto-levelling |
| Motion guides | Not listed | 7 linear guides, CoreXY | 7 linear guides | Not listed |
| Extruder | Dual-gear direct | Not listed | Not listed | Dual-drive |
| Screen | 7-inch touch | 7-inch touch | 7-inch touch | 7-inch touch |
| Connectivity | LAN, USB, TF card | WiFi | Not listed | WiFi, LAN, USB |
"Not listed" means the manufacturer data we have does not state that value. It does not mean the feature is missing.
All four printers support the same broad range of materials: PLA, ABS, PETG, wood-fill, TPU, PA, PC, CF-PLA and PA-CF (per the manufacturer's material lists).
How much bigger is each step?
Build volume grows with the cube of the edge length, so each step up is bigger than it looks.
| Model | Build volume | Relative to VEHO 4 |
|---|---|---|
| VEHO 4 | 64 litres | 1x |
| VEHO 500 Pro | 125 litres | about 2x |
| VEHO 600 Pro V3 | 216 litres | about 3.4x |
| VEHO 800 Pro | 512 litres | 8x |
The VEHO 800 Pro holds eight times the volume of the VEHO 4. That is useful for single large parts, but it also means a much larger bed to heat and a much larger machine to house.
VEHO 800 Pro: for parts up to 800 mm
The VEHO 800 Pro is the choice when your parts are longer than 600 mm in any direction. It adds a 110°C bed (the others list 100°C), a 0.1-0.8 mm layer range and 20,000 mm/s² acceleration. Its frame is 1040 x 1103 x 1211 mm and 68 kg, so it needs floor space and a dedicated power socket (rated 1600 W at 110 V or 1800 W at 220 V).
Pick it if: you make signage, large props, full-size armour, furniture prototypes or architectural models, or you want to print many medium parts in one batch.
Skip it if: most of your parts fit in 600 mm. You will pay in floor space and heating time for capacity you rarely use.
Read the full VEHO 800 Pro buyer's guide for running costs and setup space.
VEHO 600 Pro V3: the middle ground for big parts
The VEHO 600 Pro V3 offers 600 x 600 x 600 mm in an 847 x 847 x 970 mm frame. It uses CoreXY motion on 7 linear guides, 4 independent Z ball screws, magnetic auto-levelling with a 36-point mesh and automatic XY belt adjustment. Klipper with pressure advance and input shaping is listed by the manufacturer. The hotend reaches up to 300-320°C (the manufacturer lists both figures) and flows up to 32 mm³/s through a titanium/copper nozzle.
Pick it if: you print helmets, chest armour, medium signs and product housings, and want a 600 mm cube without the footprint of an 800 mm machine.
Skip it if: your parts are regularly longer than 600 mm (step up) or always under 500 mm (step down).
VEHO 500 Pro: 500 mm cube in a compact frame
The VEHO 500 Pro offers 500 x 500 x 500 mm in a 740 x 740 x 895 mm frame. It shares the 300 mm/s print speed, 600 mm/s travel, 7 linear guides, 4 independent Z ball screws and magnetic auto-levelling of the larger models, with a 320°C nozzle and an AC-heated tempered glass bed up to 100°C.
Pick it if: you want a true large-format printer that still fits in a small workshop or studio, for parts like helmets, drone frames, medium displays and enclosures.
Skip it if: you need maximum speed on small and medium parts (the VEHO 4 is faster) or you regularly exceed 500 mm.
VEHO 4: fastest of the four, for parts up to 400 mm
The VEHO 4 has a 400 x 400 x 400 mm build volume, up to 700 mm/s print speed and up to 20,000 mm/s² acceleration. It weighs 22.5 kg and measures 650 x 620 x 602 mm, so it fits on a strong desk or bench. It has 36-point auto-levelling, a dual-drive extruder, a 320°C nozzle and WiFi, LAN and USB.
Pick it if: most parts are under 400 mm, you value throughput and you have limited space.
Skip it if: you need one-piece parts above 400 mm.
Decision guide: five questions
1. What is the largest part you print in one piece?
Measure your largest typical part, not your dream project. If 90% of your jobs fit in 400 mm, a VEHO 4 plus the occasional split-and-glue job may be the better buy than a machine you rarely fill.
2. How much space do you have?
| Model | Floor/desk area | Height |
|---|---|---|
| VEHO 4 | 650 x 620 mm | 602 mm |
| VEHO 500 Pro | 740 x 740 mm | 895 mm |
| VEHO 600 Pro V3 | 847 x 847 mm | 970 mm |
| VEHO 800 Pro | 1040 x 1103 mm | 1211 mm |
Add clearance for spools, cables, airflow and removing prints. The two largest models are best on the floor or on a low, heavy-duty stand.
3. Do you print many small parts or few large ones?
Large printers heat large beds. For a batch of small parts, a smaller machine is often faster from start to finish. For single big parts, only build volume matters.
4. Which materials will you use?
All four list PLA, ABS, PETG, TPU, PA, PC and carbon-filled blends. For ABS, PC and nylon, warping grows with part size. Larger parts need a draft-free room or a draft shield, good bed adhesion and ventilation. The 800 Pro's 110°C bed limit is the highest of the four.
5. How important is speed?
The VEHO 4 lists up to 700 mm/s, the three larger models 300 mm/s. On large parts, the real limit is how much plastic the hotend melts per second (32 mm³/s on the 800 Pro and 600 Pro V3), so print time scales mostly with part volume.
Our recommendation by use case
| Use case | Recommended model |
|---|---|
| Cosplay helmets, small props, fast prototyping | VEHO 4 |
| Helmets, drone frames, medium displays | VEHO 500 Pro |
| Chest armour, product housings, medium signs | VEHO 600 Pro V3 |
| Sign letters, full armour sets, furniture parts, architectural models | VEHO 800 Pro |
For project ideas at the largest size, see what you can print with an 800 mm 3D printer. If you want to compare the VEHO line with other brands, read large-format FDM 3D printers compared. Motion systems are explained in our CoreXY 3D printer buyer's guide.
Frequently asked questions
What is the difference between the VEHO 800 Pro, 600 Pro V3, 500 Pro and VEHO 4?
The main difference is build volume: 800, 600, 500 and 400 mm on every axis. The VEHO 4 is the fastest (up to 700 mm/s) and smallest machine; the 800 Pro has the largest volume and a 110°C bed.
Which VEHO printer is the fastest?
The VEHO 4 lists up to 700 mm/s print speed and up to 20,000 mm/s² acceleration. The 800 Pro, 600 Pro V3 and 500 Pro list 300 mm/s print speed and 600 mm/s travel.
Do all VEHO printers run Klipper?
Yes. The manufacturer lists Klipper firmware for the VEHO 800 Pro, 600 Pro V3, 500 Pro and VEHO 4.
Which VEHO printer fits on a desk?
The VEHO 4 measures 650 x 620 x 602 mm and weighs 22.5 kg, so it fits on a sturdy desk. The 600 Pro V3 and 800 Pro are better placed on the floor or a heavy-duty stand.
How do I choose the right VEHO build volume?
Measure the largest part you print in one piece and add 10 to 20% for brims and supports. Then pick the smallest VEHO that fits: 400 mm (VEHO 4), 500 mm (500 Pro), 600 mm (600 Pro V3) or 800 mm (800 Pro).
Next step
Found your size? Compare full specs and the current price on the product pages: VEHO 800 Pro, VEHO 600 Pro V3, VEHO 500 Pro and VEHO 4.