Artillery M1 Pro S1 vs. FLSUN T1 Max: CoreXY vs. Delta Shootout

We compare the Artillery M1 Pro S1 (CoreXY, 260mm³, 600mm/s) and the FLSUN T1 Max (Delta, 300mm×297mm, 1000mm/s) on speed, build volume, and print quality to help you choose the right fast 3D printer.

Last updated: 2026-11-17 By the Layerline Editorial Team

Artillery M1 Pro S1 vs. FLSUN T1 Max: CoreXY vs. Delta Shootout

When speed is the name of the game, two printers stand out in the sub-500-dollar bracket: the Artillery M1 Pro S1 and the FLSUN T1 Max. One is a fully enclosed CoreXY machine with a 260mm cubic build volume; the other is a delta printer that claims a blistering 1000mm/s print speed and a unique 300mm x 297mm build area. Both target enthusiasts who want fast prints without sacrificing quality, but they take very different engineering approaches.

In this comparison, we pit the Artillery M1 Pro S1 3D Printer Fully Enclosed CoreXY 260×260×260mm Build Volume Up to 600mm/s 320°C Nozzle Closed-Loop Cooling 0.01mm Precision Auto Leveling & AI Monitoring 3D Printers against the FLSUN T1 Max 3D Printer 1000mm/s Printing Speed 0.1mm Precision 300mmx297mm Build Volume Auto-Leveling Intuitive Easy to Use Compatible with PLA/PETG/TPU. We look at speed, build volume, print quality, ease of use, and overall value so you can decide which one belongs on your desk.

Speed: The Need for Feed

Both printers are marketed as high-speed machines, but they achieve speed in different ways.

Artillery M1 Pro S1 uses a CoreXY motion system with a lightweight print head. It is rated for up to 600mm/s travel moves and 20,000mm/s² acceleration. In practice, you can expect reliable printing at 200-300mm/s with good quality, and up to 400-500mm/s for draft prints. The closed-loop cooling system keeps the hot end temperature stable even at high flow rates, which is critical when pushing filament through a 0.4mm nozzle at speed.

FLSUN T1 Max is a delta printer, which means the print head moves via three arms attached to vertical towers. Delta kinematics are inherently fast because the moving mass is low. FLSUN advertises 1000mm/s print speed. Real-world printing at 300-500mm/s is achievable with PLA, and the machine can hit 700-800mm/s for infill. However, delta printers have a curved build volume and require careful calibration to maintain accuracy at high speeds.

FeatureArtillery M1 Pro S1FLSUN T1 Max
Motion systemCoreXY (belt-driven)Delta (3-arm parallel)
Max advertised speed600 mm/s1000 mm/s
Typical usable speed200-400 mm/s300-500 mm/s
Acceleration20,000 mm/s²Not specified, typically high
CoolingClosed-loop coolingStandard part cooling fan

If raw speed is your only metric, the FLSUN T1 Max has a higher ceiling. But the Artillery M1 Pro S1 offers more consistent speed across the entire build volume because CoreXY does not suffer from the speed variations that delta printers experience near the edges.

Build Volume: Cubic vs. Cylindrical

Build volume is where the two printers diverge most significantly.

Artillery M1 Pro S1 provides a true cubic build volume of 260 x 260 x 260 mm. That is 17.6 liters of space, enough for large functional parts, helmets, or multiple smaller objects in one print run. The fully enclosed design helps maintain stable chamber temperatures for materials like ABS and ASA.

FLSUN T1 Max has a build volume described as 300mm x 297mm. Because it is a delta printer, the actual printable area is a cylinder approximately 300mm in diameter and 297mm tall. That gives you a volume of about 21 liters, slightly larger than the Artillery. However, the circular footprint means you cannot efficiently pack rectangular objects. Tall, thin prints are where delta printers shine, while wide flat parts may not fit.

FeatureArtillery M1 Pro S1FLSUN T1 Max
Build shapeCube (rectangular)Cylinder (round)
Build dimensions260 x 260 x 260 mm300 mm dia. x 297 mm
Effective volume17.6 liters~21 liters
EnclosureFull enclosureOpen frame (optional enclosure sold separately)
Best forLarge boxes, helmets, functional partsTall vases, cylindrical objects, high-speed prototypes

For most users, the Artillery M1 Pro S1's cubic volume is more versatile. The FLSUN T1 Max offers a slightly larger total volume but with geometric constraints.

Print Quality: Precision and Surface Finish

Print quality depends on motion system rigidity, hot end performance, and cooling.

Artillery M1 Pro S1 boasts 0.01mm precision (10 microns) on the Z-axis thanks to its dual lead screws and auto bed leveling. The CoreXY gantry is extremely rigid, minimizing ringing and ghosting even at high speeds. The 320°C all-metal hot end can handle engineering materials like polycarbonate and nylon. The AI monitoring system detects print failures like spaghetti or layer shifts, which is a huge plus for unattended printing.

FLSUN T1 Max specifies 0.1mm precision (100 microns). Delta printers are inherently less precise in the XY plane because the arms introduce slight nonlinearities. However, for most hobbyist prints, 0.1mm is perfectly acceptable. The T1 Max uses auto-leveling to compensate for bed tilt, but delta calibration is more involved than a standard Cartesian or CoreXY machine. Surface finish on curved parts can be excellent, but sharp corners may show slight bulging due to the kinematics.

Quality AspectArtillery M1 Pro S1FLSUN T1 Max
XY precision0.01 mm (claimed)0.1 mm (claimed)
Z precision0.0025 mm (lead screw)0.02 mm (typical)
Hot end temp320°C300°C (typical)
Auto levelingYes, with strain gaugeYes, with inductive sensor
AI monitoringYes (spaghetti, layer shift)No
EnclosureYes, helps with warpOpen, needs enclosure for ABS

If you print functional parts that need tight tolerances, the Artillery M1 Pro S1 is the clear winner. For decorative or large-scale prints where absolute precision is less critical, the FLSUN T1 Max is adequate.

Ease of Use and Features

Artillery M1 Pro S1 comes fully assembled and includes a 4.3-inch touchscreen. The auto-leveling system uses a strain gauge on the nozzle, which is more accurate than inductive probes. The closed-loop cooling system automatically adjusts fan speed based on hot end temperature, reducing noise and improving temperature stability. The AI monitoring is a standout feature: it uses a camera to detect print failures and can pause or stop the print automatically.

FLSUN T1 Max also arrives mostly assembled. It has a 4.3-inch touchscreen and auto-leveling. The delta design makes it easy to swap the hot end or nozzle. However, delta printers require periodic calibration of the arm lengths and tower positions, which can be intimidating for beginners. The T1 Max does not include an enclosure, so printing ABS or ASA requires a separate purchase.

FeatureArtillery M1 Pro S1FLSUN T1 Max
AssemblyMinimal (plug and play)Minimal (attach towers)
Touchscreen4.3-inch4.3-inch
Auto-levelingStrain gauge (nozzle)Inductive sensor
Filament runoutYesYes
Resume on power lossYesYes
EnclosureIncludedNot included
AI monitoringYesNo

For a beginner, the Artillery M1 Pro S1 is more forgiving. The FLSUN T1 Max rewards users who are willing to learn delta calibration.

Material Compatibility

Artillery M1 Pro S1 can print PLA, PETG, TPU, ABS, ASA, polycarbonate, and nylon thanks to the 320°C hot end and enclosed chamber. The closed-loop cooling system keeps the hot end consistent even when printing flexible materials at speed.

FLSUN T1 Max is compatible with PLA, PETG, and TPU out of the box. The hot end reaches 300°C, which is enough for most materials, but without an enclosure, ABS and ASA will warp. You can buy an optional enclosure, but that adds to the cost.

If you plan to print engineering materials, the Artillery M1 Pro S1 is ready to go. The FLSUN T1 Max is best for PLA and PETG unless you invest in an enclosure.

Which One Should You Buy?

Choose the Artillery M1 Pro S1 if:

  • You want a fully enclosed printer for ABS and engineering materials.
  • You need high precision (0.01mm) for functional parts.
  • You value AI monitoring for unattended printing.
  • You prefer a cubic build volume for rectangular objects.
  • You want a CoreXY machine with proven reliability.

Choose the FLSUN T1 Max if:

  • You want the absolute fastest print speeds (up to 1000mm/s).
  • You print tall, cylindrical objects like vases or lampshades.
  • You enjoy tinkering with delta kinematics.
  • You mostly print PLA and PETG and don't need an enclosure.
  • You want a slightly larger total build volume (21 liters).

Both printers are excellent in their own right. The Artillery M1 Pro S1 is the more versatile, feature-rich machine that can handle a wider range of materials and provides better precision. The FLSUN T1 Max is a speed demon that excels at tall prints and offers a unique delta experience.

For most buyers, the Artillery M1 Pro S1 3D Printer Fully Enclosed CoreXY 260×260×260mm Build Volume Up to 600mm/s 320°C Nozzle Closed-Loop Cooling 0.01mm Precision Auto Leveling & AI Monitoring 3D Printers is the safer, more capable choice. But if speed and delta novelty are your priorities, the FLSUN T1 Max 3D Printer 1000mm/s Printing Speed 0.1mm Precision 300mmx297mm Build Volume Auto-Leveling Intuitive Easy to Use Compatible with PLA/PETG/TPU is a thrilling option.

Check the current prices on the product pages to see which fits your budget today.